Vossen HF6-4 Wheels for the Toyota LandCruiser 300

The Vossen HF6-4 is a Hybrid Forged wheel well suited to the Toyota LandCruiser 300 because it matches the vehicle's factory 6x139.7 bolt pattern, offers custom offsets for correct fitment, and uses a flow forming process that produces a stronger, lighter barrel than a standard cast wheel. It is available in 17 to 24 inch diameters and widths up to 12 inches, giving LC300 owners a wheel suited to touring, towing, and street use.

Bolt Pattern and Fitment

The LandCruiser 300 runs a 6x139.7 bolt pattern, and the HF6-4 is offered in this exact fitment as part of its 6-lug range. Through Vossen's Custom Tailored Program, offset, width, and centre bore can all be specified to suit the LC300, so the wheel bolts up correctly rather than requiring spacers or adapters to compensate for an ill-fitting off-the-shelf spec.

Diameters run from 17 to 24 inches, with widths up to 12 inches. This range gives LC300 owners flexibility depending on the build:

• 17 and 18 inch options suit owners prioritizing sidewall height for touring and light off-road work, keeping tyre choice open for all-terrain and mud-terrain rubber.
• 20 and 22 inch options suit owners after a more street-oriented stance while retaining the wheel's structural benefits.

Finish Options

The HF6-4 is available in Satin Black, Gloss Black, Silver Polished, Satin Bronze, and Hyper Gunmetal. Its split-spoke design and deep concave barrel give the LC300 a more aggressive, filled-out stance compared with the factory wheel, without the finish looking out of place on a vehicle that is still expected to work hard.

Why It Suits Melbourne LC300 Owners

Local conditions matter when choosing a wheel. Melbourne's mix of pothole-affected suburban roads, unsealed tracks further out, and long-distance touring routes across Victoria means an LC300 owner needs a wheel that copes with real-world impact, not just a wheel that looks good in the driveway.

The added strength from the flow forming process gives more margin against kerb strikes and rough surfaces than a standard cast alternative, while still keeping unsprung mass in check compared with a heavier forged wheel of the same size.

Frequently Asked Questions

Does the Vossen HF6-4 fit the LandCruiser 300?

Yes. The LandCruiser 300 uses a 6x139.7 bolt pattern, and the Vossen HF6-4 is manufactured in this fitment as part of its 6-lug range. Offset and width are configured to the LC300 through Vossen's Custom Tailored Program.

What size Vossen HF6-4 suits the LandCruiser 300?

For touring and light off-road use, 17 or 18 inch diameters preserve tyre sidewall height. For a street-focused stance, 20 or 22 inch diameters are more common, though this reduces sidewall protection on rough surfaces.

Is the Vossen HF6-4 a forged or cast wheel?

It is a Hybrid Forged wheel. It starts as a cast blank and is flow formed, a process that stretches and compresses the barrel under heat and pressure to improve the aluminium's grain structure. This makes it stronger and lighter than a standard cast wheel, at a lower cost than a fully forged wheel.

What finishes are available for the Vossen HF6-4?

Satin Black, Gloss Black, Silver Polished, Satin Bronze, and Hyper Gunmetal.

Get the Right Fitment for Your LandCruiser 300

Mag Wheel & Tyre can source the Vossen HF6-4 in the exact diameter, width, and offset to suit your LandCruiser 300, whether you are building a touring rig or a street-focused daily. Get in touch with our team to discuss fitment, finish options, and tyre packages tailored to your setup.

Enquire Now